Fra Open Space Aarhus
(Add instructions for installing the printer under OS X)
m (Add link to the Linux PPD file)
|Linje 33:||Linje 33:|
Download the ppd file
Download the ppd fileand select it in the filebrowser and click Next
Versionen fra 26. aug 2014, 18:34
|Auto-Category||Do not hack|
|Category||Do not hack|
|Categorized by||Jesper Lindeberg|
This printer is reachable via the network at 172.30.0.188
Under network printer select SHARP MX-4101N and click Next - If it's not on the list, just wait a moment for the network scanner to finish.
Select - PDD file and click next
Download the ppd file and select it in the filebrowser and click Next
Setup printer options as below and click Next
Give the printer a name and placement if you wish.
A printer setting dialog will popup and should look like this, if not see next picture.
If a dialog with Output conflicts pops up, go to printeroptions
Set output as on the picture.
When finished click OK - The printer is now setup, try to make a test print and be happy.
Mac OS X Install
Download the driver image file (for either OS X 10.9 or for older versions of OS X), mount it and start the installer by opening the MX-C26.pkg file. Please note that the following instructions have only been verified on OS X 10.9.
Accept the license.
Open Printers & Scanners from System Preferences.
Click the small plus sign (+) below the printer list.
Select Add Printer or Scanner... from the menu (Do NOT select the automatically discovered SHARP MX-4101N no matter how tempting it may be).
Select the automatically discovered SHARP MX-4101N from the list.
Click the Use: menu and choose Select Software... from the drop-down menu.
Select the SHARP MX-4112N PPD (this is as close to the 4101N as you can get) from the list.
Wait for OS X to configure the newly added printer.
Click Options & Supplies...
Select Options, enable the options as shown below and click OK.