Philips PM 5132
Fra Open Space Aarhus
(Forskel mellem versioner)
Mihtjel (diskussion | bidrag)
(Oprettede siden med '{{Infobox gear |title = Philips PM 5132 |image = 1011-0.jpg |id = 1011, 1018 |category = Do not hack |categorizer = Flemming |owner = OSAA …')
Gå til næste forskel →
(Oprettede siden med '{{Infobox gear |title = Philips PM 5132 |image = 1011-0.jpg |id = 1011, 1018 |category = Do not hack |categorizer = Flemming |owner = OSAA …')
Gå til næste forskel →
Versionen fra 27. mar 2011, 19:19
| Fil:1011-0.jpg | |
| ID | 1011, 1018 |
|---|---|
| Categorization | |
| Category | Do not hack |
| Categorized by | Flemming |
| Owner | OSAA |
| Type | Function Generator |
| Acquired | 2010 |
| Properties | |
| Frequencies | 0.1 Hz - 2 MHz |
| Voltage range |
3 Vpp to 30 Vpp Attenuation to 60 dB, steps of 10 dB |
| Wave forms |
Sine Triangular Square Positive pulse Negative pulse |
| Sweep |
50ms to 100s Sweep voltage on rear |
About
These frequency generators are useful for sweeping ranges of up to 20x, eg. 10 kHz to 200 kHz, and display the resulting responses on an oscilloscope in X-Y mode. Set the scope to X-Y mode, and attach a coaxial cable from the sweep output on the rear of the unit to the X input on the scope. Attach the output signal of the unit as input to the device under test, and the output of the device to the Y channel of the scope.
